SAFETY AND OPERATIONAL STANDARDS FOR COMMERCIAL ADVENTURE PARKS

Before an investor signs a term sheet for an adventure park, the project needs to show, in writing, that it will be built and run to a recognised safety standard.

Safety requirements for adventure parks come from several standards, developed by different bodies. This guide covers two: the EN 15567 series for ropes courses, and ISO 21101 for the safety management system of an adventure tourism provider. Anyone planning an adventure tourism investment needs to know which standard applies to which attraction, and what each one requires.

WHY CERTIFICATION IS ALSO A COMMERCIAL DECISION

Warrior Group technician in a safety harness and hard hat working on the steel frame of a ropes course under construction

ISO describes ISO 21101 as a way for providers to demonstrate safe practice and to support compliance with applicable legal requirements. That is where the commercial value of certification lies. Insurers, lenders and licensing authorities get a documented, third-party-verified process to assess, which is easier to underwrite than a general assurance that a park is safe.

A project can be safe while following its own internal safety approach. Each counterparty still needs a documented reference point to assess, and a named standard, written in from the design stage, gives them one.

EN 15567 AND ISO 21101: WHAT EACH STANDARD COVERS

Each standard addresses a different layer of the same project.

The EN 15567 series (Europe, CEN). Developed by the European Committee for Standardization (CEN) technical committee CEN/TC 136, Sports, playground and other recreational facilities and equipment, EN 15567-1 sets construction and safety requirements for the design, construction, inspection and maintenance of permanent and mobile ropes courses. EN 15567-2 sets operation requirements for the same courses. A related standard, EN 17109, sets safety requirements and test methods for the individual safety systems that protect participants against falls on these courses. EN standards are voluntary in most jurisdictions.

Cleared sand site with floodlight poles at the start of an adventure park construction project
Warrior Group construction team in hard hats and high-visibility vests in front of a nearly completed climbing structure at an adventure park

ISO 21101 (global). The EN standards focus on how attractions are designed and built. ISO 21101 sets requirements for the safety management system an adventure tourism provider runs day to day. It covers risk assessment, safety policy, staff competency, incident response and continual review, and it can be used by providers of all types and sizes, in any geographic, cultural and social setting. A project that meets every construction standard for its attractions still needs a safety management system for its operation, and ISO 21101 covers that layer.

OPERATIONAL STANDARDS BEYOND THE STRUCTURE ITSELF

Construction certification answers whether an attraction was built correctly. Operational standards answer whether it is being run correctly, five years after opening, by a staff team that has turned over twice since launch.

EN 15567-2 covers this ground directly for ropes courses, including zip lines built as part of a course. It sets supervision levels, safety instructions for participants, and competence requirements for instructors and rescuers, so every operator works to the same written requirements.

Both standards depend on documentation. A safety system held only in the memory of a long-serving operations manager leaves the business when that person does. A documented, auditable system stays with the park. Warrior Group has operated the AlUla Adventure Hub since 2019. From 2021 to 2023, the group managed full operations at the Jebel Jais Zipline, Sledder and Bear Grylls Explorers Camp in Ras Al Khaimah, including maintenance and staff training.

FOUR PRACTICES OF CERTIFIED OPERATORS

  • They name the specific standard in the construction contract. EN 15567-1, or the relevant equivalent for the attraction type, is written in as a deliverable, with certification as a condition of handover.
  • They secure both construction certification and operational certification. A structurally certified attraction also needs a certified safety management system, such as ISO 21101, to cover the operational risks that construction certification leaves open.
  • They treat documentation as a deliverable from day one. Inspection logs, maintenance records, staff competency records and incident reports are built into the operating model at the start, ready whenever an insurer or licensing authority asks for them.
  • They plan for recertification and staff turnover across the life of the park. EN 15567-2 requires periodic inspections, and staff competence has to be maintained as the team changes. A park that budgets for both as a recurring cost stays compliant long after opening day.

FREQUENTLY ASKED QUESTIONS

Is compliance with EN 15567 legally required? It is voluntary in most jurisdictions. Naming it in the construction contract makes it a contractual requirement for that project.

What is the difference between EN 15567-1 and EN 15567-2? EN 15567-1 covers the construction and safety requirements for a ropes course: how it is built. EN 15567-2 covers its operation, including supervision, safety instructions for participants, and the competence of instructors and rescuers: how it is run day to day.

Why would a project need both a construction standard and ISO 21101? Certification to a construction standard shows that an attraction was built correctly. Certification to ISO 21101 shows that the organisation running it has a working safety management system for risk assessment, staff competency and incident response. A project can meet one and still need the other. Holding both gives a lender or insurer a complete picture of the project.

How does certification affect financing and insurance? Certification gives insurers and lenders an independent record of how the park was built and how it is run. Each insurer and lender sets its own criteria, so ask each one early which standards and records it expects to see.

WORKING WITH WARRIOR GROUP ON STANDARDS AND CERTIFICATION

Warrior Group has built and operated attractions for Red Sea Global, in AlUla, Fujairah and Ras Al Khaimah, and at the Liwa Festival in Abu Dhabi.

If you are planning a project and need clarity on which standards apply to your attraction mix, we would welcome the conversation.

Contact Warrior Group’s Construction Division to discuss certification and compliance for your next adventure park.

error:
Shield logo with 'WARRIOR' text

Cookie Settings

We use cookies to personalize content, run ads, and analyze traffic. Privacy Policy.